Resolved JACK issues on notebook

Finally got around troubleshooting the issues I was facing with JACK on my notebook, a BTO that is actually a Clevo W170ER. Somehow I couldn’t go lower than -p128 with USB audio interfaces. When I thought I had tried every option, even disabling hyperthreading, I noticed two unidentified entries in my lsusb output:

Bus 001 Device 003: ID 8087:07da Intel Corp. 
Bus 002 Device 003: ID 5986:0401 Acer, Inc

The first entry is a Bluetooth adapter and the second entry is a webcam. Both devices are unnecessary when making music so I thought, why not unbind them. First I had to figure out their respective bus ID’s:

$ tree /sys/bus/usb/drivers/usb
/sys/bus/usb/drivers/usb
??? 1-1 -> ../../../../devices/pci0000:00/0000:00:1a.0/usb1/1-1
??? 1-1.3 -> ../../../../devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3
??? 2-1 -> ../../../../devices/pci0000:00/0000:00:1d.0/usb2/2-1
??? 2-1.6 -> ../../../../devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6
??? bind
??? uevent
??? unbind
??? usb1 -> ../../../../devices/pci0000:00/0000:00:1a.0/usb1
??? usb2 -> ../../../../devices/pci0000:00/0000:00:1d.0/usb2
??? usb3 -> ../../../../devices/pci0000:00/0000:00:14.0/usb3
??? usb4 -> ../../../../devices/pci0000:00/0000:00:14.0/usb4

Since the Bluetooth adapter sits on bus 1 and the webcam on bus two their respective ID’s should be 1-1 and 2-1. So I echoed the ID’s to the unbind file in the same directory:

$ echo -n "1-1" | sudo tee /sys/bus/usb/drivers/usb/unbind
$ echo -n "2-1" | sudo tee /sys/bus/usb/drivers/usb/unbind

Good riddance:

$ lsusb
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Then I started JACK again with -p64 using an USB audio interface connected to bus 3 (so no rate matching hub in between) and no more xruns, not even with a generic kernel and using WiFi and all. Next hurdle is the onboard sound. Below -p128 I get bursts of massive xruns and so far I didn’t manage to pinpoint the culprit.

Edit #1: I’ve found out that the Bluetooth adapter is the main bottleneck. Also, by echoing the aformentioned ID’s (1-1 and 2-1) you disable the whole USB bus apparently. To disable just the USB device echo the last ID in the respective path names, so for the Bluetooth adapter that’s 1-1.3 and for the webcam 2-1.6. This way you can still use the USB bus on which these devices are residing. In my case disabling the whole bus is not an option, this would mean I’d have to connect all my USB interfaces to bus 3 (bus 4 doesn’t have any external inputs) which could result in these devices getting in each other’s way with regard to bandwidth. After echoing the ID’s the output of the tree command looks like this:

$ tree /sys/bus/usb/drivers/usb
/sys/bus/usb/drivers/usb
??? 1-1 -> ../../../../devices/pci0000:00/0000:00:1a.0/usb1/1-1
??? 2-1 -> ../../../../devices/pci0000:00/0000:00:1d.0/usb2/2-1
??? bind
??? uevent
??? unbind
??? usb1 -> ../../../../devices/pci0000:00/0000:00:1a.0/usb1
??? usb2 -> ../../../../devices/pci0000:00/0000:00:1d.0/usb2
??? usb3 -> ../../../../devices/pci0000:00/0000:00:14.0/usb3
??? usb4 -> ../../../../devices/pci0000:00/0000:00:14.0/usb4

The lsusb command still shows the devices though.

Edit #2: unbinding drivers like described above won’t persist across reboots. If you’d like to make the unbinding persistent you could add the unbind command to /etc/rc.local or create a script that runs at login. There are other options of course like blacklisting the Bluetooth drivers.

Resolved JACK issues on notebook